Portrait Photography Camera Settings

Photography is Incomplete Without Good Retouching
December 24, 2018
Methods of Deep-Etching
April 15, 2021
Show all

Portrait Photography Camera Settings

Camera settings for portrait photography will depend upon things of every portrait, but I will be able to offer you some general ideas which will be helpful as a start line.


Focus Mode

First of all, I might select the autofocus rather than shooting in the manual because focusing is going to be faster and easier with autofocus. Additionally, you’ll not make your model feel bored while you are trying to focus manually.

For models who don’t move or who crawl, I prefer to use the only Area Focus Mode (this is the name in Nikon cameras. In Canons it’s called One-shot AF Mode). When half-pressing the shutter release the camera will grab and lock the main target until you finally press it to require the photo. If the topic is moving rapidly, you’ll try the Continuous/AI Servo Focus Mode. During this case, the camera won’t lock the main target when half-pressing the shutter release. Instead, it’ll track your subject. To find out more please have a glance at this camera focus guide.

Camera ISO

The next step is selecting an ISO value. ISO determines the sensitivity of your camera to light. The darker the place, the upper the ISO number you’ll need (your camera is going to be more sensitive to light and it’ll take brighter images). However, confine the mind that raising the ISO means your images will have a grainy look (also referred to as digital noise). You’ll get to evaluate if the noise is suitable or not? If you would like to boost the ISO an excessive amount of you would possibly think about using a flash or the other external light instead. to find out more please read this camera ISO article.

Shooting Mode

Finally, I select the shooting mode. Employing a semi-automatic mode may be a good option for portraits because you’ll be ready to react faster to any changes. The Aperture Priority mode is often handy in most portraits because it allows you to line the aperture value. You’ll use low aperture values like f/1.4-f/4 to make a blurry effect within the background or higher if you favor the background to be sharper. Your camera will select the acceptable shutter speed automatically to urge honest exposure. Read this guide to camera aperture for more info on how an aperture works

Leave a Reply

Your email address will not be published. Required fields are marked *